• HOME
  • PROJECTS
  • TRAINING
  • SEARCH
  • REQUEST SYNOPSIS
  • CONTACT US
    • Kamen Technologies - Assured Placements And Embedded Training Centre
    SEARCH

        SEARCH :  

    KA001 A Simple Digital Power-Factor Correction Rectifier Controller
    KA002 A System for the Dynamic Control and Thermal Characterization of Ultra Low Power Gas Sensors
    KA003 Active Noise Control in Headsets by Using a Low-Cost Microcontroller
    KA004 An Automatic Soil Pore-Water Salinity Sensor Based on a Wetting-Front Detector
    KA005 An Innovative Ultrasonic Time-of-Flight Measurement Method Using Peak Time Sequences of Different Frequencies
    KA006 Design and Implementation of a Home Embedded Surveillance System with Ultra-Low Alert Power
    KA007 Development of a Microcontroller-Based Frequency Synthesizer cum Vector Voltmeter
    KA008 Distributed Intelligent Sensor Network for the Rehabilitation of Parkinson’s Patients
    KA009 DSP-Based Control of Grid-Connected Power Converters Operating Under Grid Distortions
    KA010 Electrical Model of Microcontrollers for the Prediction of Electromagnetic Emissions
    KA011 Experimental Performance Evaluation of Smoothing Predictive Redundancy Using Embedded Microcontroller Unit
    KA012 Implementation Methodology for Interoperable Personal Health Devices With Low-Voltage Low-Power Constraints
    KA013 Neural Compensation for a Microcontroller Based Frequency Synthesizer-Vector Voltmeter
    KA014 Optimized Wind Energy Harvesting System Using Resistance Emulator and Active Rectifier for Wireless Sensor Nodes
    KA015 Optimizing the Localization of a Wireless Sensor Network in Real Time Based on a Low-Cost Microcontroller
    KA016 Performance Investigation of Neural-Network-Based Unified Power-Quality Conditioner
    KA017 Photosensitivity Characterization of Nanostructure Tin Oxide Films and Alternative Photo detector Application
    KA018 Remotely monitoring a patient’s mobility: A digital health application
    KA019 Self-Powered Wireless Sensor for Air Temperature and Velocity Measurements With Energy Harvesting Capability
    KA020 Signal Generator for Wireless Impedance Monitoring of Microbiological Systems
    KA021 Spike Latency Coding in Biologically Inspired Microelectronic Nose
    KA022 Wavelet Analysis for the Detection of Parametric and Catastrophic Faults in Mixed-Signal Circuits
    KA023 Control of brushless DC motor with an AVR microcontroller
    KA024 A Low-Cost Stand-Alone Multi channel Data Acquisition, Monitoring, and Archival System With On-Chip Signal Preprocessing
    KA025 A Microcontroller-Based Multi-Function Solar Tracking System
    KA026 A Programmable Interface Circuit for an Ultra low Power Gas Sensor
    KA028 Design and Development of Microcontroller Based Electronic Queue Control Systems
    KA029 Highly Optimized Nano crystal-based Split Gate Flash for High Performance and Low Power Microcontroller Application
    KA030 Low-cost charge collector of photovoltaic power conditioning system based dynamic DC/DC topology
    KA031 Microcontroller Based Cryptosystem With Key Generation Unit
    KA031 A Multi-Tag Access Scheme for Indoor UWB Localization Systems used in Medical Environments
    KA036 A Simple Approach on Implementing IMU Sensor Fusion in PID Controller for Stabilizing Quadrotor Flight Control
    KA037 A Smartphone-Based Haptic Vision Substitution System for the Blind
    KCA038 A Specialised System for Dynamic Control and Adjustment of the Colour Temperature and Illumination of a Lighting System
    KCA039 A system for fruit tree canopy characters measuring based on CAN-bus
    KCA040 A web PLC using distributed web servers for data acquisition and control
    KCA045 Design and Implementation of a Ball-Shooting Robot with IR-Based Embedded Vision
    KCA048 Design and Realization of a Photovoltaic System Equipped with a Digital MPPT Control
    KCA051 Design of Dual-axis Inclinometer Based On MEMS Accelerometer
    KCA055 Exploration of Tasks Partitioning Between Hardware Software and Locality for a Wireless Camera Based Vision Sensor Node
    KA002 GPS-GSM Integration for Enhancing Public Transportation Management Services
    KA003 ZigBee-based Vehicle Access Control System
    KA004 Feasibility of Using a Wireless Mesh Sensor Network in a Coal-Fired Power Plant
    KA005 Wireless Measurement and Control System for Environmental Parameters in Greenhouse
    KA006 ZigBee-Wireless Mesh Networks for Building Automation and Control
    KA009 Implementation of Greenhouse Monitoring System Based on RF Transceiver
    KA010 Practical design of active & intelligent energy-saving System with modules strategy
    KA011 A Scheme for the Application of Smart Message Language in a Wireless Meter Reading System
    KA012 Implementing ZigBee Protocol as Assignments in Teaching Embedded Systems
    KA013 Performance Analysis of Non-Beaconed IEEE 802.15.4 for High-Confidence Wireless Communications
    KA001 Toward Intelligent Machine-to-Machine Communications in Smart Grid
    KA015 Development of Road Light Gateway with Sensor Network
    KA016 Design of the node system of wireless sensor network and its application in digital agriculture
    KA018 Real Time Paddy Crop Field Monitoring Using Zigbee Network
    KA019 A proposed architecture for scada network security
    KA020 Design of Monitor-and-control System for Supermarket Fresh Area Based on ZigBee
    KA021 The Solution of Hybrid Electric Vehicle Information System by Modbus Protocol
    KA022 A DCVSL Delay Cell for Fast Low Power Frequency Synthesis Applications
    KA023 A Fluid Dynamic Based Coordination of a Wireless Sensor Network of Unmanned Aerial Vehicles: 3-D Simulation and Wireless Communication Characterization
    KA025 A Hybrid Wired/Wireless Networking Infrastructure for Greenhouse Management
    KA026 Design and Implementation of Vehicle Monitoring and Early-warning System Based on WinCE
    KA029 Experimental Characterization of Synchronization Protocols for Instrument Wireless Interface
    KA030 Mixed Bio-Signal Lossless Data Compressor for Portable Brain-Heart Monitoring Systems
    KA031 Sambot: A Self-Assembly Modular Robot System
    KA033 Wireless Sensor Networks for Cost-Efficient Residential Energy Management in the Smart Grid
    KA001 Haptic Sensing Foot System for Humanoid Robot and Ground Recognition With One-Leg Balance
    KA002 Self-Organizing Fuzzy Haptic Teleoperation of Mobile Robot Using Sparse Sonar Data
    KA003 A Variable-Diameter Capsule Robot Based on Multiple Wedge Effects
    KA004 Human-Like Walking: Optimal Motion of a Bipedal Robot With Toe-Rotation Motion
    KA006 FPGA-Based Parallel DNA Algorithm for Optimal Configurations of an Omnidirectional Mobile Service Robot Performing Fire Extinguishment
    KA007 Dynamic Load Emulation in Hardware-in-the-Loop Simulation of Robot Manipulators
    KA008 Evolving Gaits of a Hexapod Robot by Recurrent Neural Networks With Symbiotic Species-Based Particle Swarm Optimization
    KA009 An Integrated Triangulation Laser Scanner for Obstacle Detection of Miniature Mobile Robots in Indoor Environment
    KA011 A New Motion Control Method for Bipedal Robot Based on Noncontact and Nonattached Human Motion Sensing Technique
    KA012 A Hierarchical Algorithm for Indoor Mobile Robot Localization Using RFID Sensor Fusion
    KA013 Design and configuration of a hexapod walking robot
    KA014 Free Model Control for Semi-passive Biped Robot
    KA016 High Speed Switch Electromagnetic Valve Control for a Miniature Pneumatic Robot Locomotion
    KA017 LabVIEW and CRIO Linear Control of a Coaxial Two-wheeled Mobile Robot
    KA018 Mobile Robot Real-time Path Planning Based on Virtual Targets Method
    KA019 Research on the method of automatic obstacle avoidance for robot
    KA020 The remote control of mobile robot based on embedded technology
    KA021 Design of Adaptive PD Controller for Weight Independent Target Tracking of Home Service Mobile Robot
    KA022 A Multilateral Synthetic Aperture Wireless Positioning Approach to Precise 3D Localization of a Robot Tool Center Point
    KA023 Low-Cost Dual Rotating Infrared Sensor for Mobile Robot Swarm Applications
    KA024 Design of a Robot Cloud Center
    KA025 Continuum Robot Appendages for Traversal of Uneven Terrain In In Situ Exploration
    KA026 Robust Feedback Control for Attitude Stabilization of a Rotary-Winged Flying Robot in Hover
    KA027 Mechanical design and kinematic analysis of the AH1N1 humanoid robot
    KA001 Automatic HDL-based generation of homogeneous hard macros for FPGAs
    KA002 Implementation and Performance Analysis of SEAL Encryption on FPGA, GPU and Multi-Core Processors
    KA003 A novel design methodology for implementing reliability-aware systems on SRAM-based FPGAs
    KA004 A High Performance and Memory Efficient LU Decomposer on FPGAs
    KA005 FPGA Implementation of Adjustable Wideband Fractional Delay FIR Filters
    KA006 On FPGA-based implementations of the SHA-3 candidate Grřstl
    KA007 Skein Tree Hashing on FPGA
    KA008 Reconfigurable Cache implemented on an FPGA
    KA009 Evaluation of white-box and grey-box Noekeon implementations in FPGA
    KA010 VLSI Implementation of Balanced Binary Tree Decomposition based 2048-point FFT/IFFT Processor for Mobile WI-Max
    KA011 Hierarchical Design of an Application-Specific Instruction Set Processor for High-Throughput and Scalable FFT Processing
    KA012 Construction of Optimum Composite Field Architecture for Compact High-Throughput AES S-Boxes
    KA013 VLSI Design of an SVM Learning Core on Sequential Minimal Optimization Algorithm
    KA014 VLSI Architecture of Arithmetic Coder Used in SPIHT K
    KA015 Parallel Architecture for Hierarchical Optical Flow Estimation Based on FPGA
    KA016 Energy-Efficient Low-Latency 600 MHz FIR With High-Overdrive Charge-Recovery Logic
    KA017 Pipelined Parallel FFT Architectures via Folding Transformation
    KA018 Loop Acceleration Exploration for ASIP Architecture
    KA019 A Low-Power Low-Cost Design of Primary Synchronization Signal Detection
    KA020 Toeplitz Matrix Approach for Binary Field Multiplication Using Quadrinomials
    KA021 Memory Efficient Modular VLSI Architecture for Highthroughput and Low-Latency Implementation of Multilevel Lifting 2-D DWT
    KA022 High-Throughput Soft-Output MIMO Detector Based on Path-Preserving Trellis-Search Algorithm
    KA023 mpact on Performance and Energy of the Retention Time and Processor Frequency in L1 Macrocell-Based Data Caches
    KA024 Robust Secure Scan Design Against Scan-Based Differential Cryptanalysis
    KA001 A Cooperative Clustering Protocol for Energy Saving of Mobile Devices with WLAN and Bluetooth Interfaces
    KA002 A Fluid Dynamic Based Coordination of a Wireless Sensor Network of Unmanned Aerial Vehicles 3-D Simulation and Wireless Communication Characterization
    KA004 Characterization of off-the-shelf hardware for transcutaneous power and data transmission
    KA005 Development of Laguerre Neural-Network-Based Intelligent Sensors for Wireless Sensor Networks
    KA006 Dual-mode bluetooth wireless local area network channel-select filter for direct conversion receivers
    KA007 Energy efficient channel agility utilizing dynamic multi-channel CCA for ZigBee RF4CE
    KA010 More efficient home energy management system based on ZigBee communication and infrared remote controls
    KA008 High Temperature Superconducting Motor Cooled by On-Board Cryocooler
    KA014 Wireless Sensor Networks for Conservation and Monitoring Cultural Assets
    KA001 A Multimodal Transducer for Cardiopulmonary Activity Monitoring in Emergency
    KA002 Daily Monitoring of Asthmatics by Means of Individual Devices for Exhaled Breath Temperature Measurement
    KA005 Remote Wound Monitoring of Chronic Ulcers
    KA006 Intra-Body Temperature Monitoring using a Biofeedback Solution
    KA007 A Mobile Monitoring System of Blood Pressure for Underserved in China by Information and Communication Technology Service
    KA008 Design and Application of Mobile Embedded Systems for Home Care Applications
    KA012 Development of mobile psychiatry for Bipolar Disorder patients
    KA013 Blind Constellation Estimation and Detection using Cluster Analysis
    KA014 Computing Technology Used in Retrieval of Patient’s Record
    KA015 Denoising and QRS detection of ECG Signals using Empirical Mode Decomposition
    KA016 System Level Design of a Secure Healthcare Smart Card System
    KA001 A Design of Greenhouse Monitoring & Control System Based on ZigBee Wireless Sensor Network
    KA005 ZigBee-based Vehicle Access Control System
    KA007 Wireless Measurement and Control System for Environmental Parameters in Greenhouse
    KA008 Development of Remote Waste Gas Monitor System
    KA011 Accelerometer based transportation mode recognition on mobile phones
    KA012 Design and Implementation of the Low-Power Tracking System Based on GPS-GPRS Module
    KA013 GPS Based Road Monitoring System
    KA016 Car Monitoring, Alerting and Tracking Model
    KA017 Implementation and Analysis of Integration GSM/GPRS modem in a TMS320VC6713 Digital Signal Processor for Vehicle Location
    KA021 Drunken Driving and Rash Driving Prevention System
    KA022 Design of A Hybrid RFID/GPS-Based Terminal System in Vehicular Communications
    KA024 Radiations Monitoring System with Miniature Radiometers Based on Semiconductor Detectors
    KA026 A Theoretical Model of GSM Network Based Vehicle Tracking System
    KA027 An Embedded Systems Approach to Monitor Green House
    KA028 Solid Waste Monitoring System Integration based on RFID, GPS and Camera
    KA029 A Scheme for the Application of Smart Message Language in a Wireless Meter Reading System
    KA030 Voice Over Zigbee Networks with Environmental Monitoring
    KA031 A Scalable Location-Based Services Infrastructure Combining GPS and Bluetooth Based Positioning for Providing Services in Ubiquitous Environment
    KA034 Position Matching Based Autonomous Speed Regulation System for Vehicles
    KA044 An on-line distributed induction motor monitoring system based-on ARM and CAN bus
    KA045 The Design of the Scene of the Accident Alarm System Based on ARM and GPS
    KA001 A Dual-Mode Conditioning Circuit for Differential Analog-to-Digital Converters
    KA002 A Micro-Power EEG Acquisition SoC With Integrated Feature Extraction Processor for a Chronic Seizure Detection System
    KA003 A Modular Real-Time Fieldbus Architecture for Mobile Robotic Platforms
    KA004 A Sub-Nanosecond Time Interval Detection System Using FPGA Embedded I/O Resources
    KA005 A VLSI Neural Monitoring System With Ultra-Wideband Telemetry for Awake Behaving Subjects
    KA006 Acoustic Sensor for In-Pile Fuel Rod Fission Gas Release Measured
    KA008 Applying Online Monitoring for Nuclear Power Plant Instrumentation and Control
    KA010 Characterizing Jitter Performance of Multi Gigabit FPGA-Embedded Serial Transceivers
    KA011 Comparison Measurements of Silicon Carbide Temperature Monitors
    KA012 Computational Intelligent Gait-Phase Detection System to Identify Pathological Gait
    KA013 COTS-Based Wireless Magnetic Sensor for Small Satellites
    KA014 Evaluation of Current Density in DC Motor Brushes for Mining Machines Based on Air-Gap Field Measurement
    KA015 Fault-Tolerant Position/Attitude Estimation of Free-Floating Space Objects Using a Laser Range Sensor
    KA016 FPGA-Based Vibration Analyzer for Continuous CNC Machinery Monitoring With Fused FFT-DWT Signal Processing
    KA017 Fuzzy C-Means Clustering of Signal Functional Principal Components for Post Processing DynamicScenarios of a Nuclear Power Plant Digital Instrumentation and Control System
    KA018 Instrument an Off-Shelf CCD Imaging Sensor Into a Handheld Multispectral Video Camera
    KA0019 Low Cost MIMO Testing for RF Integrated Circuits
    KA020 Low-Power Wireless Micromanometer System for Acute and Chronic Bladder-Pressure Monitoring
    KA021 Microcantilever Array Pressure Measurement System for Biomedical Instrumentation
    KA022 Microcontroller-Based Experimental Setup and Experiments for SCADA Education
    KA023 Model-Based Development of Virtual Laboratories for Robotics Over the Internet
    KA024 NCSLab: A Web-Based Global-Scale Control Laboratory With Rich Interactive Features
    KA025 Open Source Hardware for Instrumentation and Measurement
    KA026 Performance Characterization of a Wireless Instrumentation Bus
    KPD001 An Adaptive Dead-time Compensation Method for Sinusoidal PWM-controlled Voltage Source Inverter with Output LC Filter
    KPD002 An Adaptive Flux Observer With Online Estimation of DC Link Voltage and Rotor Resistance For VSI Based Induction Motors
    KPD003 An Effective Control Technique for Medium-Voltage High-Power Induction Motor Fed by Cascaded Neutral-Point-Clamped Inverter
    KPD004 A Seven-Level Inverter Topology for Induction Motor Drive Using Two Level Inverters and Floating Capacitor Fed H-Bridges
    KPD005 A Voltage Space Vector Diagram Formed by Six Concentric Dodecagons for Induction Motor Drives
    KPD006 Dead-Time Elimination of Nine Switch Converter
    KPD007 Embedded DSP-Based Compact Fuzzy System and Its Application for Induction-Motor V f Speed Control
    KPD008 Fault-Tolerant Technique for Δ-Connected AC-Motor Drives
    KPD009 Improved Three Phase Current Reconstruction for Induction Motor Drives With DC Link Shunt
    KPD010 Output Voltage Correction for a Voltage Source Type Inverter of an Induction Motor Drive
    KPD011 Position Sensorless Control Based on Coordinate Transformation for Brushless DC Motor
    KPD012 Sensorless Brushless DC Motor Drive Based on the Zero-Crossing Detection of Back Electromotive Force (EMF) From the Line Voltage Difference
    KPD013 Adaptive Nonlinear Direct Torque Control of Sensor less IM Drives With Efficiency Optimization.
    KPS001 A New Control Technique for Three Phase Shunt Hybrid Power Filter
    KPS002 A Novel Back Up Wide Area Protection Technique for Power Transmission Grids Using Phasor Measurement Unit
    KPS003 Cascade multilevel static synchronous compensator configuration for wind farms
    KPS004 Control Scheme of Cascaded H-Bridge STATCOM Using Zero Sequence Voltage and Negative Sequence Current
    KPS005 DC Capacitor Voltage Equalization in Neutral Clamped Inverters for DSTATCOM Application
    KPS006 Design and Implementation of a Current-Source Converter for Use in Industry Applications of D-STATCOM
    KPS007 Dynamic Capacitor (D-CAP): An Integrated Approach to Reactive and Harmonic Compensation
    KPS008 Improved 48 pulse static synchronous compensator for high voltage applications
    KPS010 Performance Comparison of VSC-Based Shunt and Series Compensators Used for Load Voltage Control in Distribution Systems
    KPS012 Power-Quality Improvement of a Stand-Alone Induction Generator Using a STATCOM With Battery Energy Storage System
    KPS013 STATCOM Based Indirect Torque Control of Induction Machines During Voltage Recovery After Grid Faults
    KPS014 Temporary Overvoltage and GPR Characteristics of Distribution Feeders With Multigrounded Neutral .
    KPS015 Probabilistic Multistage PMU Placement in Electric Power Systems.
    KPE501 A 1-MHz, 12-V ZVS Nonisolated Full-Bridge VRM With Gate Energy Recovery.
    KPE502 A Bidirectional Three-Level DC–DC Converter for the Ultracapacitor Applications.
    KPE503 Accurate Power Loss Model Derivation of a High-Current Dual Active Bridge Converter for an Automotive Application.
    KPE504 Active Current Sharing and Source Management in Fuel Cell–Battery Hybrid Power System.
    KPE505 Active Low-Frequency Ripple Control for Clean-Energy Power-Conditioning Mechanism.
    KPE506 A DC-to-Three-Phase-AC High-Frequency Link Converter With Compensation for Nonlinear Distortion.
    KPE507 A Different Multilevel Current-Source Inverter.
    KPE508 A Dual-Input–Dual-Output Z-Source Inverter.
    KPE509 A Fully Regulated Dual-Output DC–DC Converter With Special-Connected Two Transformers (SCTTs) Cell and Complementary Pulsewidth Modulation–PFM (CPWM-PFM).
    KPE510 A Generic Six-Step Direct PWM (SS-DPWM) Scheme for Current Source Converter.
    KPE511 A High Efficiency Flyback Converter With New Active Clamp Technique.
    KPE512 A High-Efficiency High Step-Up Converter With Low Switch Voltage Stress for Fuel-Cell System Applications.
    KPE513 A KY Boost Converter.
    KPE514 Analysis and Calculation of Zero-Sequence Voltage Considering Neutral-Point Potential Balancing in Three-Level NPC Converters.
    KPE515 Analysis and Design of a High-Efficiency Full-Bridge Single-Stage Converter With Reduced Auxiliary Components Analysis and Design of a Nonisolated Bidirectional ZVS-PWM DC–DC Converter With Coupled Inductors.
    KPE516 Analysis and Design of a Nonisolated Bidirectional ZVS-PWM DC–DC Converter With Coupled Inductors.
    KPE517 Analysis and Design of a Soft-Switching Boost Converter With an HI-Bridge Auxiliary Resonant Circuit.
    KPE518 Analysis and Design of High-Frequency Isolated Dual-Bridge Series Resonant DC/DC Converter.
    KPE519 Analysis, Design, and Control of Bidirectional Cascoded Configuration for a Fuel Cell Hybrid Power System.
    KPE520 Analysis of Passive Boost Power Converter for Three-Phase SR Drive.
    KPE521 An Effective Control Technique for Medium-Voltage High-Power Induction Motor Fed by Cascaded Neutral-Point-Clamped Inverter.
    KPE522 An Efficient AC–DC Step-Up Converter for Low-Voltage Energy Harvesting.
    KPE523 A New Approach of Minimizing Commutation Torque Ripple for Brushless DC Motor Based on DC–DC Converter.
    KPE524 A New Feedback Method for PR Current Control of LCL-Filter-Based Grid-Connected Inverter.
    KPE525 A New Space-Vector PWM With Optimal Switching Selection for Multilevel Coupled Inductor Inverters.
    AND001 Enriching Students’ Learning Experiences through a Mobile Lab Initiative
    AND002 Mobile Sign Translator for the Thai Language
    AND003 Developing an application in google android to support autonomous living of people with cognitive disabilities
    AND004 Sdsumap in sdsubuddy android based application
    AND005 Artemisa: Using an Android device as an Eco-Driving assistant
    AND006 Imitation and Learning of the Emotional Behaviour: Towards an Android-based Treatment for People with Autism
    AND007 KUIServiceManager: A service management system for KUI-based Android mobile applications
    AND008 Designing an m-learning application for a ubiquitous learning environment in the android based mobile devices using web services
    AND009 3D Visualisation of Sensor Information on Google Android Platform
    AND010 Exploring Android Developmental Psychology in a Simulation World
    AND011 Add-on applications for android
    AND012 Android based real time lamp dinner over bluetooth
    AND013 Smart phone android operated Root
    AND014 Android phone accelerated sensoe based robot navigator.
    AND015 Android phone temperature data logger over bluetooth
    AND016 Google Android smart phone android motor control system
    AND017 Energy aware real time face recognition system on mobile CPU-GPU platform
    AND018 Face Regonition for mobile phones using Eigenfaces.
    AND019 A mobile office and entertainment system based on android
    AND020 Connecting a Braile display to a smartphone to increase safety and independence for blind and deaf blind.
    AND021 Face recognitionin mobile phones
    AND022 Natural language processing with text speech on Android.
    AND023 In Corporating speech synthesis in the development of a mobile platform for e-learning.
    AND024 Hear SMS
    AND025 Technique for improving accessibility of mobile applications for blind and visually impaired users
    AND026 Earth quake monitor
    AND027 Sodoko Game
    AND028 Weather Monitor
    AND029 Product management System
    AND030 Questinair Game
    AND031 Basic English Teacher
    AND032 Snake Game
    AND033 Speaking Dictionary
    AND034 Emergency call(Video & Audio)
    AND035 Tool to announce arrival
    AND036 Geo Profile
    AND037 Display Location when calling
    AND038 Handset theft monitoring
    AND039 24 hour tracking
    AND040 Product WIKI
    AND041 Delivery announcement/authorize strange to localize you
    AND042 Switch connection dynamically
    AND043 Bus arrival predictor on the platform of android
    AND044 Real-time integration of GPS enabled mobile phones and AVL personalized real time transit navigation information on your phone.
    AND045 Serious game development as an iterative user centered agile software project
    AND046 Application of virtual mobile networking to real-time patient monitoring
    AND047 A mobile sensor/Actuator platform for real-time mistake detection and its Application to snow boarding
    AND048 Serious Game Development as an Iterative User-Centered Agile Software Project
    AND049 Cloud computing in android mobile
    AND050 Instance messaging in your mobile
    AND051 Augumented reality in android mobile
    Kamen Technologies
     
    Home | About us | Projects | Training | Payment Details | Contact us
     
    Copyright © 2011 Kamen Technologies, All Rights Reserved. Powered by VIRTUAL SYSTEMS